Frames for Works on Paper
Standard Frames Thin Frames Ultra Thin Frames Wide Frames New Frames
Frames for Canvases & Panels
Floater Frames Panel Frames New Frames
Metal Frames Mats/Boards/Plexi Other Products Price List PDF
About Our Advice
Matting
Calculations T-Hinge Folded Hinge Mounting Corners
Framing
Joining w/Wedges Joining Floater Frames w/Clamps Framing Depth Purchasing Options
Final Assembly
Wood Frame Assembly Metal Frame Assembly Paintings on Bars/Panels Conservation
Econospace Wood Spacer Wood Strainer Drilled from Side Drilled from Behind
Econospace
Standard Frame Bars Floater Frame Bars Floater Frame Panels

Metal Frame Final Assembly Step 3a

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8
   

3a

        

 Variation Step 3a: Attach Econospace to Glazing

 Tools and Supplies: Econospace and mat knife or razor blade
Cut 1" piece of econospace, peel off the paper strip and attach lightly to the left edge of the glazing (glass or Plexiglas.) Lay out long piece of econospace so it is to the right of the 1" piece on the glass. Cut off the excess so it is flush with the end of the glass.
Peal off the lining paper and apply to the glass. Continue the process counter clockwise until the 4 pieces are attached When doing the fourth side, remove the 1" piece. Recheck glazing is still clean. Then turn glazing over and lay on top of the art package.

Previous Step - Next Step