Variation Step 3a: Attach Econospace to Glazing
 |
Tools and Supplies: Econospace and mat knife or razor blade |
 |
Cut 1" piece of econospace, peel off the paper strip and attach lightly
to the left edge of the glazing (glass or Plexiglas.) Lay out long piece
of econospace so it is to the right of the 1" piece on the glazing.
Cut off the excess so it is flush with the end of the glazing. |
 |
Peal off the lining paper and apply to the glazing. Continue the process
counter clockwise until the 4 pieces are attached When doing the fourth
side, remove the 1" piece. Recheck glazing is still clean. Then turn
glazing over and lay on top of the art package.
|
Previous Step - Next Step |